AEM 30-0300 X-Series Wideband Gauge 52mm UEGO Air Fuel AFR Controller 4.9 Sensor. X-SERIES WIDEBAND UEGO CONTROLLER FEATURES. X-Series Wideband UEGO AFR Controller Gauge were fastest responding wideband air/fuel ratio controllers in an independent test vs. Includes Bosch 4.9LSU wideband UEGO sensor.
Factory calibrated resistor does not require free-air calibration, but technology allows for free-air calibration as sensor ages if user desires. Compatible with vehicle/system voltages up to 16V. 0-5V & RS232 output for data logging and feedback control, AEMnet (CANbus) for data logging and daisy-chaining multiple controllers up to 16 cylinders. Can display AFR values in hundredths of %. 52mm gauge diameter and slim 0.825 gauge depth.User configurable display via buttons on the gauge face for changing AFR values, Lambda and O2%, and 3- or 4-digit display. AEMs X-Series Wideband UEGO Air/Fuel Ratio Sensor Controller Gauges are built upon unique, patent-pending X-Digital technology that makes them the fastest responding wideband air/fuel ratio controllers in independent testing against 17 other wideband UEGO air/fuel controllers.
The X-Series Wideband UEGO AFR Sensor Controller Gauge (PN 30-0300) measures 2 1/16th-inch (52mm) in diameter, and features a modern, visually striking faceplate and new seven-segment center display that is 87% larger than the 30-4110 AEM Wideband Gauges center display. This creates the perception of a larger overall gauge, but in a common 52mm size for easy mounting. Its slim depth (less than one inch overall) and ultra slim cup depth of. 200-inches dramatically increases its application base and potential mounting locations.The X-Series Wideband UEGO AFR Gauge has a user configurable display via buttons on the gauge face that allow you to change AFR values for different fuels, Lambda or O2%, change the center display to three or four digits, perform a free-air calibration if desired as the sensor ages, and change the CAN message ID when linking multiple X-Series Inline Controllers or X-Series Controller Gauges. An Auto Dimming feature is included. Locking connectors ensure a positive connection between the harnesses and gauge and a new single board design adds to the new gauges durability. The gauge includes a 0-5v and RS232 Serial Port output for feedback control and data logging, and an AEMnet (CANbus) output for data logging. AEMnet allows additional X-Series Wideband Controllers to be daisy chained together (up to 16 cylinders) for recording AFR in multiple cylinders. It supports vehicle/system voltages up to 16V, and can be used on EFI or carbureted applications, and dynamometers in applications using gasoline, methanol, ethanol, Diesel, propane and CNG. AFR VALUE RANGE BY FUEL TYPES. Display Gasoline values from 8.0:1 to 20.0:1 AFR.
0-5V Output Gasoline values from 8.5:1 to 18.0:1 AFR. CANbus Output Gasoline values from 8.0:1 to 20.0:1 AFR. CANbus Output Lambda values from. 0-5V Output Lambda values from.
0-5V Output E85 values from 5.7:1 to 12.0:1 AFR. 0-5V Output Ethanol values from 5.2:1 to 11.0:1 AFR.0-5V Output Methanol values from 3.75:1 to 8.0:1 AFR. The item "AEM 30-0300 X-Series Wideband Gauge 52mm UEGO Air Fuel AFR Controller 4.9 Sensor" is in sale since Friday, February 21, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Gauges\Other". The seller is "mygarageautoparts" and is located in San Diego, California.
This item can be shipped worldwide.